Home/Floor standing speakers /Floor standing speakers Monitor Audio Bronze 5
Advertise

Photos and specs Floor standing speakers Monitor Audio Bronze 5

Review and test Floor standing speakers Monitor Audio Bronze 5
  • Floor standing speakers Monitor Audio Bronze 5
  • Floor standing speakers Monitor Audio Bronze 5
  • Floor standing speakers Monitor Audio Bronze 5
  • Floor standing speakers Monitor Audio Bronze 5

Description of outdoor acoustics Monitor Audio Bronze 5


Floor-standing speakers Monitor Audio Bronze 5 have a relatively small size, so are ideal for sound medium-sized rooms. Acoustic systems have the same design features as all other models updated series Bronze, and equipped with similar drivers. The speaker cabinets are made of chipboard 18 mm thick, reinforced internal rods. To give outdoor speaker Bronze 5 greater stability they are mounted on a plate-grounds, equipped with supporting studs.


The speakers have a configuration of stripes of 2.5: two identical 5.5-inch speaker cones C-CAM. One of them only plays low frequencies and the other works range from the mid bass up to a frequency of 2.8 kHz, where the relay receives an RF emitter. Basewiki mounted in a separate, acoustically isolated chambers with their own inverters Hi-Ve II, one of which is directed forwards and the other backwards. The tweeter in your speakers Monitor Audio Bronze 5 is equipped WITH a dome-ITSELF a diameter of 25 mm, covered with a thin layer of gold for damping of possible resonances.


One of the design features of the column, typical of other models in the series, is a way of fixing treble/mid-range speakers to the front panel. For this purpose, applied steel pin large diameter, which with the help of threaded connection is set in the spacers between the magnets of the radiators and the rear of the corps column. Thus, solved two problems at once – removes mechanical stress from the front panel, and the total hardness of the body increases. The front panel is the speaker covered by a protective grid on an invisible magnetic attachment and RF emitter has its own protection.


Speakers to Monitor Audio Bronze 5 are connected by using a high quality cable to divider filter made of selected ingredients (including polypropylene capacitors). Unit input screw terminals, providing an opportunity to connect AC schemes Bi-wiring/Bi-amping, is conveniently located at the bottom of the rear panel.

Features of outdoor acoustics Monitor Audio Bronze 5



Configuration of 2.5 strips
WOOFER and bass/midrange cones with C-CAM into isolated internal chambers
The gilded dome tweeter C-CAM
Two bass reflex HiVe second generation (front and rear)


Features of outdoor acoustics Monitor Audio Bronze 5

The number of bands2,5
The number of speakers3
Housing type2 bass reflex HiVe II
Accommodation outdoor
The diameter and the type of tweeter 25 mm, gold-plated dome membrane from a material C-CAM
The diameter and type LF/MF-radiator 5.5 inch, the cone of C-CAM , which is loaded on the phase inverter
And diameter type bass radiator 5.5 inch, the cone of C-CAM, which is loaded on the phase inverter
Frequency range 37 Hz - 30000 Hz ( /- 3dB)
Sensitivity90 dB (1 W / 1 m)
Nominal impedance 8 Ohms
Maximum sound pressure level113,8 dB
Recommended amplifier power rating will30 - 120W
The crossover frequency600 Hz (WOOFER),2,8 kHz (mid-treble)
Input connectorstwo pairs of screw terminals
Grillremovable, magnetic fastening
Dimensions (WxHxD)898 x 215 x 282 mm
Weight11 kg

Advertise
Copyright © 2013-2019 audio-reviews.com