Home/Floor standing speakers /Floor standing speakers Cambridge Audio Aero 6
Advertise

Photos and specs Floor standing speakers Cambridge Audio Aero 6

Review and test Floor standing speakers Cambridge Audio Aero 6
  • Floor standing speakers Cambridge Audio Aero 6
  • Floor standing speakers Cambridge Audio Aero 6
  • Floor standing speakers Cambridge Audio Aero 6
  • Floor standing speakers Cambridge Audio Aero 6

Description of outdoor acoustics Cambridge Audio Aero 6

The Aero model 6 is the only progressive napilnikom in the Aero line. Speaker system has a rectangular body with a height of 980 mm, which has excellent damping. The Cabinet is mounted on the base and isolated from the floor using spikes. The reflex port is on the front panel, which eliminates the problems associated with installing speakers near the walls of the room. In developing this speaker used computer-aided design (CAD).


Instead of tweeter in flat Aero 6 uses BMR-emitter (Balanced Mode Radiator), which differs from ordinary dynamics. At high frequencies the cone vibrates of such radiator, which corresponds to the principle of the "wave bending" characteristic of the flat membrane. The rest of the range it behaves just like a traditional cone driver, i.e. moves back and forth. This technology helps to obtain a better dispersion characteristics and frequency response to expand. Another important point is that the BMR driver allows you to shift the frequency to 250 Hz, which is not so acutely perceived by the human ear, such as a standard value, usually located within 3 kHz. In fact, this driver assumes the functions of a tweeter and midrange speaker. In the end, manages to achieve a more solid, clean and surround sound, and also get another benefit that is associated with the fact that this speaker system does not require precise installation in a room or hall to listen.


The bandwidth below the value of 250 Hz, reproducing a traditional two 6.5-inch driver with paper cone drivers that deliver tight, accurate and deep enough bass.


The Aero 6's sensitivity is 90 dB, impedance is 8 Ohms, and weighs this speaker system is almost 17 kg. Speakers are protected by a grill that uses a more convenient magnetic mount. To connect the speaker cable to the back of the Cabinet there are two high quality screw terminals.


Model Aero 6 perfectly cope with the role of front channels in a home cinema, and will guarantee clean, perfectly balanced and dynamic sound when operating in stereo composition. This floor standing speaker is very attentive to detail, has good bass potential and is able to build a wide and deep stage.


Features of outdoor acoustics Cambridge Audio Aero 6


Flat treble/midrange emitter (Balanced Mode Radiator)
Two 6.5-inch woofer
The case is designed using a CAD software
Grill with magnetic mount


Features of outdoor acoustics Cambridge Audio Aero 6

The number of speakers3
Housing typebass reflex port is at the front of the Cabinet
The diameter and type of the HF/MF-radiator2" BMR driver with flat membrane
And diameter type bass radiator2 x 6.5" LF driver with a conical paper cones
Frequency range30 – 22000 Hz
Nominal impedance8 Ohms
Sensitivity90 dB
Recommended amplifier power rating will25 - 120 watts per channel
Input connectors2 screw terminals
Dimensions (WxHxD)240x980x338 mm
Weight16,9 kg

Advertise
Copyright © 2013-2019 audio-reviews.com