Home/Floor standing speakers /Floor standing speakers Arslab Classic 2 SE
Advertise

Photos and specs Floor standing speakers Arslab Classic 2 SE

Review and test Floor standing speakers Arslab Classic 2 SE

Description of outdoor acoustics Arslab Classic 2 SE


Outdoor speaker system Arslab Classic 2 SE have a three-way configuration and are designed to sound medium-sized rooms. Column is made in solid housings with deep internal damping, have a quality finish and at a height a little less than a meter, will look good in the interior of a modern living room.


Front-panel speaker systems are two subwoofer with a diameter of 5 inches. They have a powerful magnetic system, mounted on anti-resonant chassis, allowing bazovica accurately work out the most energetic musical passages. The mid-range speaker in speakers Arslab Classic 2 SE has a special phase-equalizing cap (the so-called "bullet") located at the center of its 5-inch cone. Adding this radiator will significantly align the frequency response column in the most audible range of frequencies and make the sound of vocals and acoustic instruments detailed and natural. All of these speakers have a patented design and made-to-order Arslab known manufacturer of radiators for High-End acoustics WaveCore.


Unlike the basic version of these speakers, model Arslab Classic 2 SE is equipped with high quality ribbon tweeter, which allowed to expand the range of reproduced treble and make them sound particularly transparent. In addition, these speakers have improved the separation filter, in which selected components, internal wiring and they made a custom cable made from oxygen free copper of high purity. For better mechanical isolation from the floor surface AC can be set on spikes.


System speakers Arslab Classic 2 SE can have an external finish Wenge, black ash, cherry or black piano lacquer. Columns have almost neutral tonal balance and wide dynamic range of sound and can successfully be used in stereos and home theaters, high class.


Features of outdoor acoustics Arslab Classic 2 SE



Ribbon tweeter
Wavecor Speakers
Optimal ratio price/quality


Features of outdoor acoustics Arslab Classic 2 SE

The number of bands3
The number of emitters4
Housing typebass reflex port on the rear panel
Accommodation outdoor
The type of tweetertape
The diameter and type of MF-radiator146 mm, Wavecor, with bullet patvirtintas
And diameter type bass radiator2 x 146 mm, Wavecor
Frequency range50 Hz to 40,000 Hz ( /-3 dB)
Nominal impedance6 Ohms
Sensitivity87 dB (2,83 V/1 m)
Recommended amplifier power rating will25 - 120 watts
Input connectorsone pair of screw terminals
Warranty2 years
Dimensions (WxHxD)180 x 930 x 320 mm
Weight20 kg (single column)

Advertise
Copyright © 2013-2019 audio-reviews.com