Home/Floor standing speakers /Outdoor acoustics Monitor Audio Gold 300

Photos and specs Outdoor acoustics Monitor Audio Gold 300

Review and test Outdoor acoustics Monitor Audio Gold 300
  • Outdoor acoustics Monitor Audio Gold 300
  • Outdoor acoustics Monitor Audio Gold 300
  • Outdoor acoustics Monitor Audio Gold 300

Description floor speaker Monitor Audio Gold 300

The flagship three-way Monitor Audio Gold 300 leads updated "gold" series speakers, which uses advanced technologies of the previous line Gold GX and the work at the top-end Platinum series.

The model has a strong inert body over a meter in height, made of MDF in thickness of 2 cm are used For damping radial and transverse struts and the curved profile of the sidewalls of the Cabinet increases rigidity and allows you to effectively deal with diffraction and standing waves. The basis of the AU consists of two parts, resting on the spikes or legs. Port of phase inverter is located in the rear of the hull and uses a technology called HiVe II the latest generation, which reduces turbulence, increasing the speed of the outgoing flow of air and provides fast tight bass.

All emitters have passed the flagship optimization. Protected by a metal mesh ribbon tweeter uses a more strict tolerances. Its thin membrane is made of a material C-CAM (an alloy of magnesium and aluminium with ceramic coating) and has instant responsiveness. Upper limit frequency response up to 60 kHz. This is enough for the accurate reproduction of HD-audio.

MF gear is engaged 4-inch driver, and the WOOFER section is placed at the disposal of two long-excursion 6.5" woofers. The diffusers made of a material C-CAM. Technology is used RST, providing for the application of round impressions on the surface of the diaphragm with the purpose of increasing its rigidity.

The design of the Monitor Audio Gold 300 provides for the interchange of speakers with front panel and uses long bolts that connect the rear of each emitter on the back wall of the Cabinet, which contributes to the rigidity of the housing. To protect the speaker grill is fabric that is attached to the front of napoleonica with magnets.

A cast aluminum plate with four screw terminals for two wire connection. Internal wiring and jumper connections are made using cables Pureflow Silver. The crossover used in high quality elements including capacitors based on polypropylene film and air coils. Separation of bands occurs at elevations of 790 Hz and 2.3 kHz. The model has a wide frequency range and is designed to work in large spaces.

The flagship Monitor Audio Gold 300 sounds open, transparent, dynamic and powerful, and has a high resolution and excellent detail. Napolenic has the right tonal balance, quick deep bass and large-scale scene.

Features floor speaker Monitor Audio Gold 300

Ribbon tweeter with a diaphragm of C-CAM
Diffusers midrange drivers and woofers use technology RST
Excellent cushioning, improved technology for HiVe II bass reflex port
A wide frequency range (30 Hz – 60 kHz)

Features of outdoor acoustics Monitor Audio Gold 300

The number of bands3
The number of speakers4
Housing typebass reflex, the port made in the rear and uses technology HiVe II
The type of tweeterribbon tweeter with a diaphragm of C-CAM
The diameter and type of MF-radiator4" midrange driver with a diffuser from C-CAM and RST technology, cast aluminum basket
And diameter type bass radiator2 x 6.5" LF driver material drivers: C-CAM, RST technology, cast aluminum basket
Frequency range30 Hz – 60 kHz
Sensitivity90 dB (1 W/1 m)
Nominal impedance8 Ohms
Maximum sound pressure levelOf 116.8 dB
Power200 W
Recommended amplifier power rating will100 – 200 watts
The crossover frequency790 Hz/2.3 kHz
Input connectorstwo pairs of large gold plated screw terminals
Grillfabric, removable, magnetic fastening
Dimensions Cabinet (WxHxD)210x1060x330 mm
The size of the body, including the terminals, the base and spikes (WxHxD)317х1105х370 mm
Weight27,2 kg

Copyright © 2013-2024 audio-reviews.com