Home/AV-receiver /Onkyo TX-NR676

Overview and description of the AV-receiver Onkyo TX-NR676

7.2-channel model Onkyo TX-NR676 is equipped with a high-current power transformer. Its high-current discrete amplifiers with dynamic amplification system and phase-avoiding technology provide minimum distortion, excellent transient characteristics and do not fold even in front of low-resistance overalls.
The AV-receiver supports modern DTS: X and Dolby Atmos formats (up to 5.2.2 channels), and DTS Neural: X and Dolby Surround codecs are used to convert the sound of standard multi-channel formats into an object-oriented 3D sound. As a converter, the modern DAC AK4458 is used. The VLSC technology helps to clear the signal from impulse noise after conversion. Autocalibration of speakers is handled by AccuEQ system, while AccuReflex technology provides phase compatibility of loudspeakers for Dolby Atmos with other speakers.
Onkyo TX-NR676 has Bluetooth, AirPlay and Wi-Fi circuits with two bands. After the software update, access to the integrated Chromecast platform for wireless streaming audio streaming is available, as well as to DTS Play-Fi, a wireless protocol for transferring music using the application to speakers supporting this protocol and other components. Built-in receiver technology FireConnect is great for wireless multiroom installation and makes it possible to send audio in high quality from any source to any room where the technology supporting the technology is located. The Onkyo Controller application allows you to group such columns, for example, to play a specific track in each group, and can control music playback throughout the house.
The connection to the LAN is via LAN or WLAN. With this network and through USB playback Hi-Res formats are available, including DSD up to 5.6 MHz (DSD is not supported for WLAN connection). There is built-in support for Internet services TuneIn, TIDAL, Spotify, Deezer and Pandora.
On the back panel of the case there are six HDMI inputs with the ability to pass a signal in 4K-resolution (60 Hz), supporting the BT.2020 standard and the HDCP 2.2 protocol. These inputs also accept HDR10 and Dolby Vision (HDR version with dynamic metadata and 12-bit color depth). On the front there is one more HDMI-input that does not support HDR10, Dolby Vision and BT.2020. There is a pair of HDMI-outlets, LAN port, a set of digital inputs, connectors for MM-phono stage and a pair of subwoofers. You can connect the speakers to the receiver using nine pairs of screw terminals.

Features of the Onkyo TX-NR676 AV-receiver

Support for Dolby Atmos in 5.2.2 channel configuration and DTS: X
Available Wi-Fi (2 bands), Bluetooth, AirPlay, FireConnect technology, Chromecast platform, DTS Play-Fi protocol
Support for 4K/60Hz, HDR10, Dolby Vision, DSD playback (up to 5.6MHz)

Characteristics of the Onkyo TX-NR676 AV-receiver

Number of channels: 7.2
Output power: 165 W per channel (6 Ω, 1 kHz, 1% CWI, 1 channel active, IEC)
Dynamic power: 240 watts (3 ohms, front), 210 watts (4 ohms, front), 120 watts (8 ohms, front)
Dynamic Audio Amplification: yes
Harmonic factor: 0.08% (20 Hz - 20 kHz, half power)
Input sensitivity/impedance: 200 mV/47 kΩ (linear input), 3.5 mV/47 kΩ (input of the MM phono stage)
Nominal output sensitivity/impedance: 1 V/470 Ω (subwoofer output), 200 mV/2.3 kΩ (line output for zone 2)
Frequency range: 10 Hz - 100 kHz (+ 1 dB, - 3 dB, Direct mode)
Tones: HF: ± 10 dB (7.5 kHz), LF: ± 10 dB (90 Hz)
Signal-to-noise ratio: 106 dB (line input), 80 dB (input of MM phono stage)
Speaker impedance: 4-16 Ohms
AM/FM tuner: yes
Number of AM/FM memory presets: 40
Built-in decoders (basic): Dolby Atmos (up to 5.2.2 channels), Dolby Surround, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS: X, DTS Neural: X, DTS-HD Master Audio, DTS-HD High Resolution Audio , DTS 96/24, DTS-ES, DTS Express
Autocalibration system: AccuEQ with AccuReflex Phase Alignment technology
Number of add. zones: 1
DAC: AK4458 (32 bit/384 kHz)
32-bit DSP processor: yes
Enhancer for compressed music files: Music Optimizer
Supported streaming audio file formats (over LAN and USB): MP3, WMA, FLAC (24 bit/192 kHz), WAV (24 bit/192 kHz), AIFF (24 bit/192 kHz), AAC, Apple Lossless : 24 bit/96 kHz, via USB: 24 bit/192 kHz), DSD (up to 5.6 MHz), Dolby TrueHD (USB only)
Wi-Fi support: IEEE 802.11 a/b/g/n, 2.4/5 GHz
Support for Bluetooth: version 4.1 + LE (A2DP v1.2, AVRCP v1.3)
AirPlay support: yes
Support for Chromecast and DTS Play-Fi: yes, software update required
Support for wireless technology FireConnect for multi-installation: there are supported sampling rates of 44.1 and 48 kHz
Onkyo application support for iPhone and Android: yes
Pure Audio mode: disables the display and analog video circuits
Direct mode: disables digital signal processing
Supported online services: TuneIn, Pandora, Spotify, Deezer, TIDAL
Inputs: 6 x HDMI (4K/60Hz, HDR10, Dolby Vision, BT.2020, HDCP 2.2), 1 x HDMI on the front panel (does not support HDR10, Dolby Vision, BT.2020), 2 component, 2 composite, 6 linear RCA, 1 linear 3.5 mm (front panel), MM-phono stage (RCA) input, coaxial, 2 optical, USB for external drives, Ethernet port (LAN)
Outputs: 2 x HDMI (4K/60Hz, HDR10, Dolby Vision, HLG, BT.2020, HDCP 2.2; HDMI (Main) with support for ARC and CEC, HDMI (Sub)), two Pre Out (RCA) for subwoofers, a linear RCA output for Zone 2, a 6.3 mm headphone jack
Other switching: mini-jack for calibration microphone, sockets for AM/FM antennas, 2 sockets for Wi-Fi/Bluetooth-antennas, ground terminal
Output terminals for AC: 9 pairs of screw terminals
Power supply: high-current transformer H.C.P.S. (High Current Power Supply)
Power consumption: 570 W, standby: 0.15 W
Remote Control: RC-911R
Dimensions (WxHxD): 435x174x378 mm
Weight: 10 kg

Copyright © 2013-2024 audio-reviews.com