Home/AV-receiver /AV-receiver Onkyo TX-SR444
Advertise

Photos and specs AV-receiver Onkyo TX-SR444

Review and test AV-receiver Onkyo TX-SR444
  • AV-receiver Onkyo TX-SR444
  • AV-receiver Onkyo TX-SR444
  • AV-receiver Onkyo TX-SR444
  • AV-receiver Onkyo TX-SR444

Description AV-receiver Onkyo TX-SR444

AV receiver Onkyo TX-SR444 can be an excellent basis for advanced home theater, and it is offered at a very attractive price. Giving up some extra features for which a secondary device intended to work in your home theater, the company's specialists managed to create a very interesting device with a very favorable ratio of quality and price.


The first is to note the presence in the Onkyo TX-SR444 decoder Dolby Atmos, which is almost unique to the AV equipment. The device has a 7.1 configuration, that is able to sound two additional high-rise channel, which is sufficient for the full implementation of Atmos in the room of medium size. The amplifiers in the receiver is made of a proprietary scheme, broadband amplification WRAT discrete, and develop a high output current for reliable operation even with difficult acoustics. The receiver uses the digital-to-analog converters Burr-Brown with parameters 24 bit / 192 kHz on all channels.


Tincture to surround in Onkyo TX-SR444 system is used AccuEQ room calibration, and processing ambient sound is a 32-bit DSP. Modes virtual surround sound, CinemaFILTER, and 4 possible additional acoustic treatment sound accompaniment of computer games. To adjust the sound tone is provided by turning off the regulators for low and high frequencies.


Videoseksi receiver no less interesting. The device is equipped with four HDMI inputs and one output that support transmission of 4K / HDCP2 and video from analog inputs can be converted for transmission over HDMI. Additional functions of the device can be noted a built-in Bluetooth receiver and possibility of connecting additional pairs of speakers to speak even one room.


AV receiver Onkyo TX-SR444 easy to setup and use thanks to sound rear with good location of all connector equipped with intuitive graphical prompts.


Features AV receiver Onkyo TX-SR444


Codec support Dolby Atmos
Customized toroidal transformer, high-current output stages
The Burr-Brown DACs (24 bit/192 kHz)


Characteristics of AV-receiver Onkyo TX-SR444

The number of channels7.1
Output power100 W per channel (6 Ohms, 1 kHz, 1% THD, 1 Channel Driven, IEC), 100 watts per channel (6 Ohms, 1 kHz, 1 Channel Driven, JEITA)
Dynamic power160 W (3 Ohms, front channels), 125 W (4 Ohms, front) 85 W (8 Ohms, front)
THDOf 0.08% (20 Hz - 20 kHz, half power)
The damping ratioover 40 (8 Ohms, 1 kHz, front)
Input sensitivity/impedance200 mV/47 kω (line input)
Output level and impedance 1.0 V/470 Ohms (subwoofer out)
Frequency range10 Hz - 100 kHz ( 1 dB, -3 dB, Direct mode)
Voices± 10 dB, 20 Hz (bass), ± 10 dB, 20 kHz (treble)
The signal-to-noise100 dB
Impedance AC6 – 16 Ohms or 6 – 16 Ohms
FM tuner87.5 MHz – 108 MHz
Tuner AM522 kHz – 1611 kHz
Advertise
Copyright © 2013-2019 audio-reviews.com