Description AV-receiver Onkyo TX-RZ900
New 7.2-channel model Onkyo TX-RZ900 certified THX Select2 Plus, and works with UltraHD (4K 50/60 Hz) and uses HDCP 2.2 to view the protected 4K video. In the apparatus involves manually wound toroidal transformer, audiophile-grade capacitors and high-current discrete amplifiers, allowing to achieve the lower limit of the frequency response at 5 Hz.
AV receiver is equipped with a 32-bit DSP, supports up to Dolby Atmos 5.1.2-channel configurations and DTS:X, which allows to use additional ceiling speakers. For calibration the AU is used AccuEQ system. In each channel Onkyo TX-RZ900 installed AK4458 DAC (32bit/384kHz), and to eliminate noise caused by the clock pulses, the technology VLSC.
For "fronts" used parallel push-pull amplification circuit that increases the power of the bass. Each channel has 3-stage inverted scheme Darlington transistors. WRAT technology, which can prevent phase shift, improves the sound and allows to work even with capricious AC. The model produces power 200 W per channel (6 Ohms).
The device supports Wi-Fi, Bluetooth, AirPlay and can play DSD (5.6 MHz), FLAC (24 bit/192 kHz), etc. audio formats, which are stored on computers and servers of the local network. Available online services TuneIn Radio, Spotify and Deezer. Has AM/FM tuner.
The AV receiver has got a new sleek design. The center of its aluminum facade occupied by the display, under which there is a cover that hides the controls, 6.3 mm headphone Jack, HDMI port and an input for a calibration microphone. The right side is a volume knob, and buttons to select sources and to control zone 2 and 3. On the left is the power button/standby, the activator of modes of "pure stereo", the buttons and knobs to select the sound modes and setting the tones.
The model has a wide switching capabilities. Inputs rear: 7 x HDMI (with 4K support), the MM input of the Phono stage, 2 coax/3 optical, USB, Ethernet port, etc. Outputs: 2 x HDMI (one for zone 2), 7.2-channel (RCA), RCA for two additional zones and others. There are 11 pairs of screw terminals, two of which can be used for zone 2 and 3. To control the receiver via the remote control or the app for devices with Android and iOS.
The model Onkyo TX-RZ900 meets all modern requirements in terms of functionality and provides a rich, powerful, dynamic sound in cinema, as well as accurate, musical and natural sound feed in stereo.
Features AV receiver Onkyo TX-RZ900
Certification THX Select2 Plus Dolby Atmos
Customized toroidal transformer, high-current output stages
The AK4458 DAC (32bit/384kHz), DSD playback (2.8/5.6 MHz)
Characteristics of AV-receiver Onkyo TX-RZ900
The number of channels | 7.2 | ||
Output power | 200 watts per channel (6 Ohms, 1 kHz, 1% THD, 1 Channel Driven, IEC), 235 W per channel (6 Ohms, 1 kHz, 1 Channel Driven, JEITA) | ||
Dynamic power | 320 W (3 Ohms, front channels), 270 W (4 Ohms, front) 160 W (8 Ohms, front) | ||
THD | Of 0.08% (20 Hz - 20 kHz, half power) | ||
The damping ratio | over 40 (8 Ohms, 1 kHz, front) | ||
Input sensitivity/impedance | 200 mV/47 kω (line input), a 3.5 mV/47 kOhm (input MM Phono stage) | ||
Nominal output sensitivity/impedance | 1 V/470 Ohms (Pre Out output, output for subwoofer), 100 mV/2.2 kω (line out to additional zones), 1/2.2 kω (Pre Out output for additional zone) | ||
Frequency range | 5 Hz - 100 kHz ( 1 dB, -3 dB, Direct mode) | ||
The signal-to-noise | 106 dB (line input) 80 dB (input MM Phono stage) | ||
Impedance AC | 4-16 Ohm | ||
AM/FM tuner | there | ||
The number of presets memory | 40 | ||
Built-in decoders (main) | Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS:X, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS, DTS Express | ||
THX certified Select2 Plus | there | ||
Support HDCP 2.2 | there | ||
System calibration AC | AccuEQ | ||
The number of additional zones | 2 | ||
DAC | AK4458 (32 bit/384 kHz) | ||
32-bit DSP processor | there | ||
Enhancer for compressed music files | Music Optimizer | ||
Supported formats of streaming audio files (on LAN) | MP3, WMA, WMA Lossless, FLAC, WAV, Ogg Vorbis, AAC, Apple Lossless, DSD (2.8/5.6 MHz), LPCM, Dolby TrueHD | ||
DLNA Protocol | v1.5 | ||
Support Wi-Fi | there | ||
Bluetooth | version 2.1 EDR (A2DP v1.2, AVRCP v1.3) | ||
AirPlay Support | there | ||
Support Onkyo application for iPhone and Android | there | ||
Mode Pure Audio | turns off the display and analog videotape | ||
Pure Direct Analog Path Mode | disables the digital circuit, analog videotape, tuner | ||
Function PM Bass | improve the midrange and make the bass deeper | ||
Supported online services | TuneIn Radio, Spotify, Deezer | ||
Independent adjustment of the crossover frequency for each channel | 40/50/60/70/80/90/100/120/150/180/200 Hz | ||
Inputs | 8 x HDMI (4K/60 Hz HDMI inputs 1,2,3,4 and 5 with HDCP 2.2), 2 component, 3 composite, 8 line (RCA), the MM input of the Phono stage (RCA), 2 coaxial, 3 optical, USB (support charging connected devices), Ethernet port | ||
Outputs | 2 x HDMI (4K/60Hz 4:4:4 Color Space, ARC, HDCP 2.2
Advertise
|