Photos and specs AV-receiver Onkyo TX-RZ800
Description AV-receiver Onkyo TX-RZ800
This 7.2-channel model similar to his older brother Onkyo TX-R900, but inferior to him in power (7 x 185 W at 6 Ohms) and features some design features.
AV receiver Onkyo TX-RZ800 uses high-current W-shaped transformer, capacitors, designed for audio and has separate blocks for the amplification and signal processing. Its discrete high-current amplifiers have a low impedance and give the opportunity to achieve the lower limit of the frequency range at 5 Hz.
Supports 4K resolution, and the device conforms to the standard of THX Select2 Plus. Each channel has a digital-to-analog Converter AK4458 (32 bit/384 kHz), and clear signal from impulse noise, VLSC technology helps.
The apparatus has a DSP with bit width of 32 bits, decodes the new format of three-dimensional sound with Dolby Atmos (5.1.2-channel configuration) and works with DTS:X expanding the configuration by adding the upper speakers.
In Onkyo TX-RZ800 involved a three-stage inverted amplification circuit with the transistors arlingtonsky and WRAT technology, which enables to prevent displacement of phases, to reduce distortion and to cope with non-constant impedance for the speakers.
AV receiver is equipped with AM/FM tuner, and contours Wi-Fi, Bluetooth and AirPlay support. On LAN you can play hi-RES audio, including DSD signals (2.8/5.6 MHz). Also available online services Spotify, Deezer and TuneIn.
The model received a new, more rigorous design. In the center of the aluminum panel installed 2-line display, and the right — button input selector buttons to control additional zones and handle the volume attenuator. On the left is the power button/standby button profiles, clear stereo sound, buttons, and knobs for adjusting sounds and listening mode. The rest of the controls, headphone out (6.3 mm Jack), HDMI port and a Jack for the calibration microphone hidden under the hood.
Inputs rear: 7 x HDMI, connectors the MM-Phono stage, 3 optical and 2 coaxial, USB, LAN and others. Outputs: 2 HDMI port 7.2-channel Pre Out (RCA), two RCA (zone 2 and 3). the MSS are connected to 11 pairs of screw terminals, and two of these pairs can be used for other areas. For control apply the remote control or a software application for devices with iOS or Android.
Receiver Onkyo TX-RZ800 has good functionality, provides excellent image quality and excellent sound multichannel soundtracks and stereotypical.
Features AV receiver Onkyo TX-RZ800
Compliance with the standard THX Select2 Plus Dolby Atmos
Custom sh-shaped transformer, high current discrete output
The AK4458 DAC (32bit/384kHz), DSD playback (2.8/5.6 MHz)
Characteristics of AV-receiver Onkyo TX-RZ800
| The number of channels | 7.2 | ||
| Output power | 185 W per channel (6 Ohms, 1 kHz, 1% THD, 1 Channel Driven, IEC), 230 W per channel (6 Ohms, 1 kHz, 1 Channel Driven, JEITA) | ||
| Dynamic power | 300 W (3 Ohms, front) 250 W (4 Ohms, front) 150 W (8 Ohms, front) | ||
| THD | Of 0.08% (20 Hz - 20 kHz, half power) | ||
| The damping ratio | over 40 (8 Ohms, 1 kHz, front) | ||
| Input sensitivity/impedance | 200 mV/47 kω (line input), a 3.5 mV/47 kOhm (input MM Phono stage) | ||
| Nominal output sensitivity/impedance | 1 V/470 Ohms (Pre Out output, output for subwoofer), 100 mV/2.2 kω (line out to additional zones), 1/2.2 kω (Pre Out output for additional zone) | ||
| Frequency range | 5 Hz - 100 kHz ( 1 dB, -3 dB, Direct mode) | ||
| The signal-to-noise | 106 dB (line input) 80 dB (input MM Phono stage) | ||
| Impedance AC | 4-16 Ohm | ||
| AM/FM tuner | there | ||
| The number of presets memory | 40 | ||
| Built-in decoders (main) | Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS:X, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS, DTS Express | ||
| THX certified Select2 Plus | there | ||
| Support HDCP 2.2 | there | ||
| System calibration AC | AccuEQ | ||
| The number of additional zones | 2 | ||
| DAC | AK4458 (32 bit/384 kHz) | ||
| 32-bit DSP processor | there | ||
| Enhancer for compressed music files | Music Optimizer | ||
| Supported formats of streaming audio files (on LAN) | MP3, WMA, WMA Lossless, FLAC, WAV, Ogg Vorbis, AAC, Apple Lossless, DSD (2.8/5.6 MHz), LPCM, Dolby TrueHD | ||
| DLNA Protocol | v1.5 | ||
| Support Wi-Fi | there | ||
| Bluetooth | version 2.1 EDR (A2DP v1.2, AVRCP v1.3) | ||
| AirPlay Support | there | ||
| Support Onkyo application for iPhone and Android | there | ||
| Mode Pure Audio | turns off the display and analog videotape | ||
| Pure Direct Analog Path Mode | disables the digital circuit, analog videotape, tuner | ||
| Function PM Bass | improve the midrange and make the bass deeper | ||
| Supported online services | TuneIn Radio, Spotify, Deezer | ||
| Independent adjustment of the crossover frequency for each channel | 40/50/60/70/80/90/100/120/150/180/200 Hz | ||
| Inputs | 8 x HDMI (4K/60 Hz HDMI inputs 1,2,3,4 and 5 with HDCP 2.2), 2 component, 3 composite, 8 line (RCA), the MM input of the Phono stage (RCA), 2 coaxial, 3 optical, USB port, Ethernet port (LAN) | ||
| Outputs | 2 x HDMI (4K/60Hz 4:4:4 Color Space, ARC, HDCP 2.2
Advertise
|