Home/AV-receiver /AV-receiver Onkyo TX-NR3030
Advertise

Photos and specs AV-receiver Onkyo TX-NR3030

Review and test AV-receiver Onkyo TX-NR3030
  • AV-receiver Onkyo TX-NR3030
  • AV-receiver Onkyo TX-NR3030
  • AV-receiver Onkyo TX-NR3030
  • AV-receiver Onkyo TX-NR3030
  • AV-receiver Onkyo TX-NR3030

Description AV-receiver Onkyo TX-NR3030

11.2-channel AV receiver Onkyo TX-NR3030 supports new Dolby Atmos, which provides full 3D sound and a more precise localization of effects when scaling a sound image of any object on the screen depending on its location relative to the viewer. The decoder allows you to obtain a realistic effect of moving objects in the vertical plane.


The model Onkyo TX-NR3030 THX certified Select2 Plus, equipped with HDMI (2.0) with support for Ultra HD (4K/60Hz), has upscaler for the Qdeo video scaling up to 1080p and 4K video, as well as calibration system video standard ISF. Protocol support HDCP 2.2 (HDMI 3 input and Main HDMI output) enables you to view protected video in 4K. Support for DTS Neo:X helps to hold upmix 5.1-channel tracks up to 11-channel.


Built-in Bluetooth module (2.1 EDR) with Advanced Music Optimizer luckyteam allows you to listen audio from your mobile devices. Present Wi-Fi circuit, and a LAN interface for integration into a local network and play content from computers and servers (played lossless formats, DSD (2.8/5.6 MHz) Dolby TrueHD etc.). Available online services and web radio. To control the AV receiver Onkyo TX-NR3030 is possible through applications for devices with iOS and Android.


The PSU is equipped with three transformers, separate power circuits for amplifying, audio and video circuits. Applied discrete three-stage inverted scheme on the base of the Darlington transistors to provide clear, dynamic sound. A high-current circuit with a broadband amplification technology WRAT. Pure Direct mode disables the digital circuit to obtain a natural analog sound. On Board there is a pair of DSP-processors (32 bit) and 7 Burr-Brown DACs (32-bit/192 kHz). Power: 185 watts per channel (6 Ohms).


The upper part of the aluminum facade of building Onkyo TX-NR3030 is a 2-line display, volume control and power button, standby and Pure Audio. Below installed keys select a source. Under the hood are functional buttons, 6.3 mm headphone Jack, USB port, HDMI input (with MHL support), AV-connectors, optical input and a mini Jack for microphone calibration system AccuEQ AC.


The rear panel inputs: 7 HDMI (2.0), 2 component, 3 composite, 2 optical, 3 coaxial, 6 RCA Phono equalizer, Ethernet port. Outputs: 3 HDMI (Main ARC, and the connector Sub Out for zone 2), component, 2 composite, 11.4-channel Pre Out (RCA), 2 Pre/Line Out (RCA, zone 2 and 3), two XLR (Pre Out). There is a VGA interface for PC, RS232, etc. switching. For AC there are 11 pairs of binding posts.


Features AV receiver Onkyo TX-NR3030


Format support new generation of Dolby Atmos
Certification THX Select2 Plus
Proprietary technology WRAT, three transformers in the power supply
Two 32-bit DSP processor, 7 Burr-Brown DACs (32-bit/192 kHz)


Characteristics of AV-receiver Onkyo TX-NR3030

The number of channels11.2
Output power185 W per channel (6 Ohms, 1 kHz, 1% THD, 1 Channel Driven, IEC), 230 W per channel (6 Ohms, 1 kHz, 1 Channel Driven, JEITA)
Dynamic power300 W (3 Ohms, front channels), 250 W (4 Ohms, front) 150 W (8 Ohms, front)
THDOf 0.08% (20 Hz - 20 kHz, half power)
The damping ratio60 (8 Ohms, 1 kHz, front)
Input sensitivity/impedance200 mV/47 kω (line input), 2.5 mV/47 kOhm (input MM Phono stage)
Output sensitivity/impedancerated: 200 mV/470 Ohms (Pre Out RCA), 400 mV/470 Ohms (Pre Out XLR)
Advertise
Copyright © 2013-2019 audio-reviews.com