Home/AV-receiver /AV-receiver Onkyo TX-NR1030
Advertise

Photos and specs AV-receiver Onkyo TX-NR1030

Review and test AV-receiver Onkyo TX-NR1030
  • AV-receiver Onkyo TX-NR1030
  • AV-receiver Onkyo TX-NR1030
  • AV-receiver Onkyo TX-NR1030
  • AV-receiver Onkyo TX-NR1030
  • AV-receiver Onkyo TX-NR1030

Description AV-receiver Onkyo TX-NR1030

AV receiver Onkyo TX-NR1030 meets the highest requirements for technique of this class and equipped with all modern functions. The device is manufactured in a robust metal housing voltage on the chassis. The strict asceticism of the front panel is provided with all auxiliary controls and connectors removed under a hinged lid. Onkyo TX-NR1030 is certified by the prestigious THX Select2, and provides the sound quality of a professional level.


Structurally, the AV receiver consists of two isolated parts, the preamp/processor and power amplifier, which allowed to completely eliminate crosstalk. In the power supply Onkyo TX-NR1030 a massive toroidal transformer and filter capacitors with a total capacity of 18000 UF, with separate sources for both the CPU and amplifying circuits. The receiver is equipped with the latest technology Dolby Atmos, allowing you to add surround height channels, greatly enhancing the degree of emotional impact on the audience. The audio portion of the AV receiver is built on the basis of seven two-channel Burr-Brown DAC with parameters 24 bit / 192 kHz and 32-bit DSP. The device has a 9.2-channel surround processor and is equipped with nine amplifiers, one based on the WRAT technology. To set up a home theater system is used sound room calibration AccuEQ.


On the rear panel of the AV receiver features seven HDMI 2.0 inputs (one set on the front panel) and three outputs, which allows cross-connected to the most complex AV system. Supports signal transmission of 4K/60 Hz and a professional ISF calibration, with the possibility of video upscaling lower resolution. In addition to traditional video inputs the unit has D-Sub connector to connect the PC's video card, and audioactive include connecting the turntable. The device has an 11.4-channel output from the surround processor, front-facing stereo presents XLR. The receiver can connect to your network using Ethernet or Wi-Fi, with the ability to play music files of all popular formats available devices, including lossless 24 bit / 192 kHz and DSD 2.8 MHz. The receiver also has Bluetooth receiver. Using Onkyo TX-NR1030 is possible to articulate two additional zones, using power amplifiers are not used in a home cinema channels. To control the AV receiver, you can use standard remote control or from your smartphone using a special app


Features AV receiver Onkyo TX-NR1030


Bluetooth, Wi-Fi, USB for portable media
HDMI switching 4K/60 Hz
Support Dolby Atmos
THX Select2 certification


Characteristics of AV-receiver Onkyo TX-NR1030

The number of channels9.2
Output power9х185 W (6 Ohms, 1 kHz, 1% THD 1 channel enabled)
Frequency range5 Hz – 100 kHz
THD0,08%
The ratio signal/noise ratio 110 dB (line input) 80 dB (Phono input)0.05% of
The damping ratio60
Input sensitivity200 mV/47 kω (line input), 2.5 mV/47 kOhm (Phono input)
FM tuner87.5 MHz – 108 MHz
Tuner AM522 kHz – 1611 kHz
Advertise
Copyright © 2013-2019 audio-reviews.com