Home/AV-receiver /AV-receiver Marantz SR7009

Photos and specs AV-receiver Marantz SR7009

Review and test AV-receiver Marantz SR7009
  • AV-receiver Marantz SR7009
  • AV-receiver Marantz SR7009
  • AV-receiver Marantz SR7009

Description AV-receiver Marantz SR7009

9.2-channel flagship Marantz SR7009 supports a new format for Dolby Atmos. The format provides more accurate localization effects, which is achieved due to the scaling of the sound images of objects on the screen depending on their location relative to the viewer. Most importantly, this achieves the realistic effect of moving objects vertically.

The model has 9 discrete HDAM modules with a capacity of 125 watts (8 Ohms). In the preliminary section used feedback current. In the end, the sound wins in the detail, depth and dynamics. The availability of decoders Audyssey DSX and DTS Neo:X 11.1 provides access to 11.2-channel configuration. The AC conducts calibration system Audyssey MultEQ XT32 (Pro). Audyssey LFC adjusts the bass. Any video can be scaled up to 1080p and 4K Ultra HD (60 Hz). It supports all major codecs, including HD audio.

Built-in Bluetooth-the module accepts audio/photos from mobile devices. There is Wi-Fi and AirPlay for Apple. The receiver works with the DLNA Protocol (v1.5) for the purpose of obtaining access to the files (audio and photo) of servers and computers of the local network. Available formats FLAC HD, WAV, ALAC, AIFF and DSD (2.8 MHz). There are support services, vTuner (web radio), Spotify, etc. to Control Marantz SR7009 with the remote or the Marantz app for iOS or Android.

Center front panel is a round FL-display. On the left is the input selector, to the right is the volume knob. Under the hood a more informative 2-line FL display, surrounded by controls. There is a joystick for menu navigation, buttons of the Pure Direct mode, uluchshiteli compressed files MDAX2, etc. there Are selection keys sound mode keys to control the zones and others. Under the cover are AV connectors, 6.3 mm headphone Jack, microphone input of calibration, USB (support iPod/iPhone/iPad) and HDMI port (2.0).

Inputs rear: 7 x HDMI (2.0), 3 component, 3 composite, 7.1-channel (RCA), 2 optical and coaxial, 5 line RCA connectors MM-Phono stage, LAN port. Outputs: 3 x HDMI (2.0) (one with ARC, one for zone 2), component, 2 composite, 13.2-channel Pre Out output, two RCA jacks for zone 2 and 3. There is the IR connector 2 trigger output connectors system bus, RS-232C, slot antennas (Wi-Fi and AM/FM) and 11 pairs of binding posts.

The model is equipped with user-friendly interface and feature Set Assistant for dialog settings. Features energy-saving Eco mode.

Marantz SR7009 corresponds to the status of the AV receivers of the upper price category and provides high quality sound in any AV system.

Features of the AV receiver Marantz SR7009

Support decoder a new generation of Dolby Atmos
9 amplifier modules HDAM power 125 W (8 Ohm)
4 DSP, upscaling to 1080p and 4K Ultra HD (50/60 Hz)
3 outputs and 8 inputs (HDMI 2.0), built-in Wi-Fi and Bluetooth

Characteristics of the AV receiver Marantz SR7009

The number of channels9.2
Output power200 watts per channel (6 Ohms, 1 kHz, THD 1%), 165 watts per channel (6 Ohms, 1 kHz, THD 0.7%), 125 watts per channel (8 Ohms, 20 Hz – 20 kHz, THD 0,08%)
Discrete amplifier modules HDAM new generation9 PCs.
Input sensitivity/impedance200 mV/47 kOhm
Nominal output voltage1.2 In
Frequency range (analog connectors)10 Hz – 100 kHz ( 1, -3 dB, Direct Mode)
The ratio signal/noise (analog connectors)100 dB (A-weighted, Direct Mode)
Harmonic distortion (analog connectors)0,005% (20 Hz – 20 kHz, Direct mode)
Harmonic distortion (digital connectors)0,008% (1 kHz, at 0 dB)
Video processorADV8003 (Analog Devices)
The Bitness Of The DAC24 bit/192 kHz
The FM tuner87,5 – 107,9 MHz
The AM band tuner530 – 1710 kHz
Modes for the best audio qualityDirect, Pure Direct
Support DLNA (v1.5)Yes
Built-in decoders (main)DTS HD Master, DTS ES, DTS 96/24, DTS-Neo:X 11.1, Dolby TrueHD, Dolby Digital EX, Dolby ProLogic IIx, Dolby ProLogic IIz, Dolby Atmos, Audyssey DSX
Auto calibrationAudyssey MultEQ XT32 (Pro)
Audyssey Dynamic Volume, Dynamic EQ, LFC, Sub EQ HTthere
Pack-a-punch MP3MDAX2
Support 3D video and 4K Ultra HD (60 Hz)there
Scaleranalogue and HDMI-source -> HDMI-output: 1080p, 4K (50/60 Hz)
Video calibration in accordance with professional standard ISFYes
Supported file formats for playback for PCs, servers and NAS via USBMP3, WMA, AAC, ALAC (24-bit/96 kHz), FLAC, FLAC HD (24 bit/192 kHz), WAV (24 bit/192 kHz), AIFF (24-bit/192kHz), DSD (2.8 MHz), JPEG
Playback without pausesfor FLAC, WAV, AIFF, ALAC, DSD
Bluetooth (V2.1 EDR) and Wi-Fithere
Control via the Marantz Remote appYes
Device with Android OS and iOS as a remoteYes
Control via web browserthere
The pass-through signal via HDMI in standbythere
Pass-through 3D video and 4K videothere
The number of additional zones2
Inputs8 HDMI (2.0), USB (24 bit/192 kHz, compatible with iPod/iPhone/iPad), 4 composite, 3 component, 6 line RCA input MM-Phono equalizer, 7.1 channel input (RCA), 2 coaxial, 2 optical, LAN interface
Outputs3 HDMI (one with ARC, one for zone 2), 2 composite, component, 13.2 CH output Pre Out (RCA), 2 Pre Out (RCA) zone 2 and 3, 6.3 mm headphone Jack
Othersockets for AM/FM antennas, 2 jacks for complete Wi-Fi antennas, 3.5 mm Jack for the calibration microphone, IR socket, 2 trigger outputs (12V), 2 system bus connector (with possibility to connect external IR emitter), RS-232C, the ground terminal
Function control HDMI CECthere are controls on/off.off. etc. functions of the components via the HDMI port
Output terminals for speakers11 pairs of screw terminals color coded (4 – 16 Ohms)
Eco Modethere
Power consumption700 W
Power consumption on idle without sound65 W (with Eco Mode), 110 W (Eco Mode)
Power consumption in standby mode0.2 W
Remote controlRC026SR universal, programmable, learning, LCD display
Dimensions (WxHxD)440x185x411 mm
Weight13,8 kg

Copyright © 2013-2024 audio-reviews.com