Home/AV-receiver /AV-receiver Marantz SR5010
Advertise

Photos and specs AV-receiver Marantz SR5010

Review and test AV-receiver Marantz SR5010
  • AV-receiver Marantz SR5010
  • AV-receiver Marantz SR5010
  • AV-receiver Marantz SR5010
  • AV-receiver Marantz SR5010

Description AV-receiver Marantz SR5010

Case SR5010 Marantz has a 3-sectional facade with round FL-display in the center. The left side is the input selector, power switch/standby, and a headphone Jack, and the right volume attenuator. At the bottom placed buttons activate the modes, Direct, Pure Direct and Auto surround function improve the sound of MP3 files, M-DAX2, buttons for the additional zones, etc. Under a cover hidden AV connectors and 3.5 mm Jack for the calibration microphone. At the bottom is the HDMI port and USB supporting iPod/iPhone.


7.2-channel Marantz model SR5010 able to work with the format of three-dimensional sound with Dolby Atmos in 5.1.2-channel configuration and supports a resolution of Ultra HD (4K 60Hz, 4:4:4 Pure Color). The onboard processor scales any video up to 4K. With the new firmware at the device offers the ability to decode DTS:X, which allows you to Supplement the system with DC ceiling loudspeakers and to provide 3D sound. Auto calibration speakers engaged Audyssey MultEQ XT.


Technology support HDCP 2.2 ensures that the view is protected 4K content. Also available high dynamic range (HDR) and a richer color gamut corresponding to the standard BT.2020.


Increased are brand HDAM modules, which together with a powerful power supply unit SR5010 allow Marantz to provide up to 180 watts per channel (6 Ohms, THD: 1%). Used feedback current. In circuits involved perfect accessories.


Wireless technologies circuits Wi-Fi and Bluetooth. Supports AirPlay for Apple. LAN play formats high resolution audio including DSD (2.8 MHz) and FLAC (24 bit/192 kHz) and ALAC. Has built-in support for network services such as vTuner and Spotify Connect. Has AM/FM tuner. Superior brand application opens the possibility to control the AV receiver with the help of mobile devices based on iOS or Android.


Back panel is full of switching connectors, among which there are such inputs: 7 x HDMI (2.0 a), a set of digital inputs (2 coaxial and optical), 7.1-channel RCA, LAN, etc. From the available outputs it is possible to allocate two HDMI 7.2-channel RCA output for zone 2 (RCA). For speakers used 7 pairs of screw terminals. There are two antennas for wifi/Bluetooth.


Marantz model SR5010 is a full — featured modern AV receiver with the latest surround sound formats. The phone provides a powerful, dynamic and detailed sound in your home theater and allows you to enjoy clear stereo sound.


Features of the AV receiver Marantz SR5010


Brand discrete amplifier modules HDAM feedback current
Power 7 x 180W, upscaling to 4K
Resolution support Ultra HD and Dolby Atmos
Support for HDCP 2.2, the contours of the built-in Wi-Fi and Bluetooth


Characteristics of the AV receiver Marantz SR5010

The number of channels7.2
Output power180 W per channel (6 Ohms, 1 kHz, THD: 1%), 140 W per channel (6 Ohms, 1 kHz, THD 0.7%), 100 watts per channel (8 Ohms, 20 Hz – 20 kHz, THD 0,08%)
Discrete amplifier modules HDAM latest generation7 PCs.
Input sensitivity/impedance200 mV/47 kOhm
Frequency range (analog connectors)10 Hz – 100 kHz ( 1, -3 dB, Direct Mode)
The ratio signal/noise (analog connectors)100 dB (Direct Mode)
AM tunerthere
FM tuner with RDSthere
Modes to play audio in high qualityDirect, Pure Direct
Support DLNA (v1.5)Yes
Built-in decoders (main)Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Surround, DTS:X and DTS Neural:X (with new firmware), DTS HD Master Audio, DTS ES, DTS 96/24, DTS Express
Support HDCP 2.2there
Auto calibration ACAudyssey MultEQ XT
Audyssey Dynamic Volumethere
Audyssey Dynamic EQthere
Pack-a-punch MP3M-DAX2
The Bitness Of The DAC24 bit/192 kHz
Support 3D video and 4K Ultra HD (60 Hz, 4:4:4 Pure Color)there
Scaleranalogue and HDMI-source -> HDMI-output: 1080p, 4K (30/25/24 Hz)
File formats supported when playing from computers, servers and NAS via USBMP3, WMA, AAC, ALAC (24-bit/96 kHz), FLAC, FLAC HD (24 bit/192 kHz), WAV (24 bit/192 kHz), AIFF (24-bit/192kHz), DSD (2.8 MHz), JPEG
Playback without pausesfor FLAC, WAV, AIFF, ALAC, DSD
AirPlay Supportthere
Support Bluetooth (V2.1 EDR) and Wi-Fithere
Management, using proprietary Marantz AVR Remote App for iOS devices and AndroidYes
Control via web browserthere
The pass-through signal via HDMI in standby modethere
Pass-through 3D video and 4K videothere
The number of additional zones1
Inputs8 x HDMI (2.0 a), USB (compatible with iPod/iPhone), 3 composite, 2 component, 5 RCA, 7.1-channel input (RCA), 2 coaxial, 2 optical, LAN interface
Outputs2 x HDMI (one with ARC), composite, component, 7.2-channel Pre Out (RCA), Pre Out (RCA) zone 2, headphone Jack (6.3 mm)
Othersockets for AM/FM antennas, 2 sockets for the bundled wifi/Bluetooth antennas, 3.5 mm Jack for the calibration microphone, an IR input, trigger output (12V), 2 x system bus, RS-232C
Function control HDMI CECthere are controls on/off.off. etc. functions of the components via the HDMI port
Output terminals for speakers7 pairs of screw terminals color coded (4-16 Ohms)
Energy-saving Eco modethere
Power consumption650 W, standby mode: 0.2 W
Power consumption on idle without sound45 W (Eco Mode), 75 W (Eco Mode)
Remote controlRC024SR, 4 Smart Select buttons (used to quickly access the settings programmed for each button)
Dimensions (WxHxD)440x161x346 mm
Weight10 kg

Advertise
Copyright © 2013-2023 audio-reviews.com