Description AV-receiver Marantz NR1506
Updated the AV receiver Marantz NR1506 have a recognizable sleek design and has a metal enclosure of relatively small height with shaped front panel. It is made in a stack of symmetrical design, with located on the center display and two large control knobs on the sides. The front also has HDMI and USB ports for quick connection of devices and the earphone Jack and a measurement microphone. To the USB connector on the front panel you can connect your iPod/iPhone or USB storage device with music files.
The device is equipped with five power amplifiers, and to connect all speaker system provides a reliable screw terminals. The receiver has a surround sound decoder that supports almost all modern formats, including DTS HD Master and Dolby TrueHD. To automatically adjust the ambient sound provided by Audyssey menu language, the device has a flexible bass management with the ability to redirect them to other channels.
On the rear panel of the Marantz NR1506 has 5 HDMI inputs and output, supports HDCP2.2 and video 3D / 4K. In addition, NR1506 equipped with two digital and three analog inputs as well as output Pre-out for the main stereo channels and two subwoofers.
The receiver supports operation in a computer network for DLNA and has an Ethernet connector and built-in Wi-Fi module. For the network, and from USB storage devices, supports playback of all popular file formats, including High-resolution PCM with parameters up to 24 bit / 192 kHz and DSD 2.8 MHz. Possible direct connection with mobile devices using AirPlay or Bluetooth, but to improve the sound quality of compressed records technology is used MDAX2. As an additional source of signal in the receiver is provided the FM-tuner with RDS-information.
To manage all modes NR1506, as well as navigate through your music collection, you can use this handy app for mobile devices Remote Marantz Amp that is compatible with both Android and iOS.
Features of the AV receiver Marantz NR1506
Broad functionality: USB, Ethernet, Wi-Fi, Airplay, Bluetooth
The output from the preamplifier 2.1 (connection 2 subwoofers)
Audio support 24-bit/192 kHz
Characteristics of the AV receiver Marantz NR1506
The number of channels | 5.1 |
Output power | 85 watts per channel (6 Ohms, 1 kHz, THD 1%), 60 W per channel (6 Ohms, 1 kHz, THD 0.7%), 50 watts per channel (8 Ohms, 20 Hz – 20 kHz, THD 0,08%) |
Discrete amplifiers of the latest generation | 5 PCs. |
Input sensitivity/impedance | 200 mV/47 kOhm |
Frequency range (analog connectors) | 10 Hz – 100 kHz ( 1 /- 3 dB) |
The ratio signal/noise (analog connectors) | 98 dB (A-weighted, Direct Mode) |
FM tuner with RDS | there |
The FM tuner | 87.5 - 108 MHz |
Range AM tuner | 522 - 1611 kHz |
Modes for the best audio quality | Direct, Pure Direct |
Support DLNA (v.1.5) | Yes |
Gapless playback | there |
Internet radio | there |
Built-in decoders (main) | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, DTS-ES, DTS 96/24, Dolby Pro-Logic II |
Auto calibration | Audyssey MultEQ |
Audyssey Dynamic EQ | there |
Audyssey / Dynamic Volume | there |
Pack-a-punch MP3 | M-DAX2 |
The Bitness Of The DAC | 24 bit / 192 kHz |
Support 3D video and 4K Ultra HD (60 Hz, 4:4:4 Pure Color) | there |
Supported file formats for playback for PCs, servers and NAS via USB | MP3/WMA/AAC/FLAC 192/24, WAV 192/24, ALAC 96/24, DSD 2,8 |
Playback without pauses | for FLAC, WAV, AIFF, ALAC, DSD |
AirPlay Support | there |
Support Bluetooth (V2 1 EDR) and Wi-Fi | there |
Control via the Marantz Remote App | there |
The use of devices with Android and iOS as a remote control | there |
Control via web browser | there |
The pass-through signal via HDMI in Standby mode | there |
Pass-through 3D video and 4K video | there |
The number of additional zones | there |
Inputs | 6 HDMI (1 front), 3 linear, coaxial, optical, composite 3, the microphone system is auto-calibrated, LAN interface |
Outputs | HDMI 2.1 with pre-outs (jacks for two subwoofers), headphone, composite, 5 pairs screw glue to AU |
Other | sockets for AM/FM antennas, 2 jacks for complete Wi-Fi antennas, 3.5 mm Jack for the calibration microphone, IR socket, trigger output (12V), 2 system bus connector (can connect an external IR receiver) |
Function control HDMI CEC | there are controls on/off.off. etc. functions of the components via the HDMI port |
Ability to rename inputs | there |
Output terminals for speakers | 5 pairs of screw terminals color coded (4 – 16 Ohms) |
Energy-saving Eco mode | there |
Power consumption | 180 W |
Power consumption on idle without sound (ECO On / Off) | 25 W / 35 W |
Min. power consumption in standby mode | 0.2 W |
Remote control | RC024SR, 4 Smart Select buttons (used to quickly access the settings programmed for each button) |
Dimensions (W x h x D) | 440 x 105 x 376 mm |
Weight | 8.2 kg |
Copyright © 2013-2023 audio-reviews.com |