Photos and specs AV-receiver Denon AVR-X4100W

Description AV-receiver Denon AVR-X4100W

7.2-channel AV receiver Denon AVR-X4100W supports the innovative Dolby Atmos-enabled speakers, providing 3D sound c precise localization of effects in space. The bottom line is that the sound is set to the same trajectory and moving on-screen objects. Especially impressive in its realism moving objects vertically. The model uses the following channel configurations for Dolby Atmos: 5.1.2 or 5.1.4, and 7.1.2 with additional amplifier. The third digit indicates the number of ceiling speakers or specialized speakers. Calibrate speakers Audyssey MultEQ XT32 (Pro Ready), LFC and the system adjusts the bass and prevents its penetration into the Suite.

In the center of the front panel integrated 2-line FL display. In the left part of the rendered input selector and power button on the right of the volume knob. The controls are under the cover. There's also an HDMI (2.0), USB support for iPod/iPhone/iPad, headphone Jack (6.3 mm), AV connectors and a mini Jack for the calibration microphone.

To enhance the use 7 of high-current discrete units with a capacity of 125 watts (8 Ohms). To save electricity helps the Eco mode. The screen displays a counter showing the reduction of its consumption. Supported video 4K (60 Hz). Available any video upscaling up to 1080p and 4K (60 Hz).

AV receiver Denon AVR-X4100W works with Wi-Fi signal through the built-in Bluetooth circuit, and for Apple devices, AirPlay. The presence of Wi-Fi, LAN port and support DLNA (v1.5) provides access to audio/photos of NAS servers and computers. Reproduced formats FLAC HD, WAV, AIFF (24 bit/192 kHz) and DSD (2.8 MHz). Supported web services, including vTuner and Spotify.

To control the X4100W uses the remote or the Denon app for Apple gadgets, Kindle Fire and Android-based devices. The Adjuster Setup Assistant helps quickly prepare the AV receiver to work. Supported two additional zones in multiroom installations.

Inputs rear: 7 x HDMI (2.0), 2 component, 3 composite, 5 line RCA connectors MM-Phono stage, 2 coaxial, 2 optical, bus Denon Link HD for the Blu-ray player Denon, LAN interface. Outputs: 3 x HDMI (one with ARC, one for 2nd zone), component, 2 composite, 13.2 CH output Pre Out (RCA), 2 RCA for zone 2 and 3. There are slots for Wi-Fi antennas (2 PCs.) for AM/FM antennas, 2 trigger outputs, RC-232C, IR connectors (input/output). To connect the MSS to serve 11 screw terminals.

Receiver Denon AVR-X4100W has everything needed for the modern DC with great sound quality.

Features AV receiver Denon AVR-X4100W

Support decoder a new generation of Dolby Atmos
The auto-calibration system Audyssey MultEQ XT32 (Pro Ready) Audyssey LFC
Support 4K (60 Hz), built-in Bluetooth and Wi-Fi, support for DSD

Characteristics of AV-receiver Denon AVR-X4100W