Description AV-receiver Denon AVR-X3200W
AV receiver Denon AVR-X3200W equipped with seven amplifiers sound power of 105 W, and supports the latest formats, including Dolby Atmos. After the software update will also be available in DTS:X. the Unit is manufactured in robust metal housing, uncluttered front panel which is a minimal set of controls, large and very informative display, plus a few connectors.
AV receiver Denon AVR-X3200W include broad sets of inputs and outputs. The most popular today presents HDMI 8 inputs (one of which is located on the front panel) and two outputs. HDMI support HDCP2.2 and transfer video with a resolution 4K UltraHD. Built-in video processor provides conversion of the input signals to 1080p or 4K, which provides additional convenience when connecting various sources to a single projector or TV.
AV receiver is equipped with advanced self-calibrating surround sound Audyssey MultEQXT, which conducts an accurate assessment of the settings and placement of speakers and acoustic properties of the room. In addition to it, using the system Dynamic EQ and Dynamic Volume, which increases the usability of the system. Based on this model to build a home cinema system in the configuration of up to 7.2 for the usual format, or 5.2.2 for object-oriented (Dolby Atmos or DTS:X).
Denon AVR-X3200W has a modern network functionality. A network connection is possible by cable and Wi-Fi with support for DLNA 1.5 and Airplay. In addition, for the direct connection of gadgets has a built-in Bluetooth receiver. And on the front panel of the receiver has a USB connector which can be connected to portable hard drives or iPhone/iPod. With both USB and network playback of Lossless files, including WAV and FLAC files with parameters up to 24 bit / 192 kHz and DSD 2.6 MHz. Includes support for Spotify and the ability to receive Internet radio. The AV receiver can be used for scoring the secondary zone, removing the signal from line level output and, depending on the system configuration, with acoustic.
Features AV receiver Denon AVR-X3200W
Dolby Atmos
8 HDMI inputs with support for 4K Ultra HD and 2 outputs
The auto-calibration system Audyssey MultEQ XT
Ethernet, Wi-Fi, Bluetooth, AirPlay, USB for portable media and iPod/iPhone
Characteristics of AV-receiver Denon AVR-X3200W
The number of channels | 7.2 |
Output power | 105 W per channel (8 Ohms, 20 Hz – 20 kHz, 0,08%), 135 watts per channel (6 Ohms, 1 kHz, 0,7%) |
Input sensitivity/impedance | 200 mV/47 kω (line input) |
Frequency range | 10 Hz - 100 kHz ( 1 dB, -3 dB, Direct mode) |
The signal-to-noise | 100 dB (Direct) |
Impedance AC | 4 – 16 Ω or 6 – 16 Ohms |
FM tuner | 87.5 MHz – 108 MHz |
Tuner AM | 522 kHz – 1611 kHz |
Built-in decoders (main) | Dolby Atmos, DTS:X (after the update), Dolby Digital Plus, DTS-HD High Resolution Audio, Dolby TrueHD, DTS-HD Master Audio |
System calibration | Audyssey MultEQ XT, Dynamic EQ, Dynamic Volume |
Enhancer for compressed music files | Compressed Audio Restored |
Supported audio file format (USB, Ethernet, Wi-Fi) | MP3/WMA/AAC/FLAC 192/24, WAV 192/24, ALAC 96/24, DSD IS 2.8, JPEG |
Bluetooth | version 2.1 A2DP Advanced Audio Distribution |
AirPlay Support | there |
Support the Denon app for iPhone and Android | there |
Direct | there |
Adjusting the crossover frequency | there |
The upscaling to 4K UltraHD | there is, for digital and analog video signals |
Inputs | 8 HDMI 4K Ultra HD/60 Hz (1 front), 2 optical, 5 audio/video, 2 component, USB for portable media and iPod/iPhone |
Outputs | 2 HDMI (2.0), 2 outputs on the sub Pre-output on the second zone output with the 7.2 surround processor, 6.3 mm headphone Jack |
The outputs on the speaker | seven pairs of screw terminals color-coded |
Other switching | Ethernet, RS232, trigger output, input/output, system remote control, mini-Jack for the calibration microphone, socket for Wi-Fi antenna (2) and AM and FM |
Power consumption | 600 watts, 0.1 watts in Standby mode |
Dimensions (WxHxD) | 434x167x388 mm |
Weight | 11.3 kg |
Copyright © 2013-2023 audio-reviews.com |