Home/AV-receiver /AV-receiver Arcam FMJ AVR550
Advertise

Photos and specs AV-receiver Arcam FMJ AVR550

Review and test AV-receiver Arcam FMJ AVR550
  • AV-receiver Arcam FMJ AVR550
  • AV-receiver Arcam FMJ AVR550
  • AV-receiver Arcam FMJ AVR550

Description AV-receiver Arcam FMJ AVR550

7.1-channel Arcam FMJ AVR550 from the updated brand line of AV receivers supports Dolby Atmos in 5.1.2-channel configuration. To expand the configuration up to 7.1.4 it is recommended to Supplement the system with 4-channel a spoke or a pair of 2-channel Moshnikov. The model works with all major codecs, including DTS-HD Master Audio and Dolby TrueHD, and after the release of the new firmware will appear full support for DTS:X.


Among the features of the design can be called a return to traditional knobs for volume control, which was lacking in the AV apparatus of the previous line. The regulator is installed in the center of the slightly curved front panel. Above is a 2-line display, and left and right — five buttons, with which you can select the source, enter the menu, turn on the Direct mode to obtain high-quality stereo sound and activate other functions. On the right side of the facade there is a power button and a standby mode indicator, and a 3.5 mm headphone Jack and line-in 3.5 mm Aux input.


The model is equipped with powerful toroidal transformer and is capable of delivering 7 x 90 watts at 8 Ohms. On Board there is a FM tuner. Supports digital radio DAB (not available in Russia). It is possible to integrate Arcam FMJ AVR550 to the local network via an Ethernet port, as well as playback of compressed files and lossless formats stored on the network devices (UPnP servers/PC/Mac). Supported vTuner (web radio) and web service Spotify. Device control is available by remote control, using network (IP control) or by MusicLife app for iOS devices.


For calibration the AU is applied progressive system of Dirac Live, which uses the microphone connected to the computer with installed software Direct Live. In this case, the computer must be connected to the same local network as the AV receiver.


The unit received 7 inputs and 3 outputs HDMI 2.0 a support HDCP 2.2, which allows you to play copy-protected content in Ultra HD resolution. One of the HDMI ports supports MHL to play HD video on mobile devices. There is a wide range of digital and analog inputs and 7.2.4-channel Pre Out (RCA). Rear mounted USB port for external storage, trigger connectors, RS-232 and other connectors. To connect the MSS involved 7 pairs of screw terminals, two of which can be used for zone 2.


Receiver Arcam FMJ AVR550 refers to the audiophile grade components and able to provide excellent sound quality, both in DC and in a two-channel system.


Features of the AV receiver Arcam FMJ AVR550


Work with 4K Ultra HD Dolby Atmos
Seven inputs and three HDMI outputs(2.0 a)
Advanced system autocalibration of speakers Dirac Live


Characteristics of AV-receiver Arcam FMJ AVR550

The number of channels7.1/5.1.2/7.1.4
Output power7 x 90 watts (8 Ohm, 1kHz, 0,2% THD), 2 x 110 W (8 Ohms, 20 Hz – 20 kHz, 0.02% THD)

Advertise
Copyright © 2013-2019 audio-reviews.com