Home/Amplifier /Stereo amplifier Rotel RA-11 V2
Advertise

Photos and specs Stereo amplifier Rotel RA-11 V2

Review and test Stereo amplifier Rotel RA-11 V2
  • Stereo amplifier Rotel RA-11 V2
  • Stereo amplifier Rotel RA-11 V2

Description stereo amplifier, Rotel RA-11 V2

Integrated amplifier Rotel RA-11 V2 differs from the normal model RA-11 availability RS-232 interface, which allows you to control all its functions with the help of complex computer systems, and also serves to update the firmware.


Model RA-11 V2 has a built-in Wolfson WM8740 DAC (24bit/192kHz) and new control processor. Used carefully selected high-quality components, including metal film resistors and other elements. In the power supply traditionally used a toroidal transformer with low output impedance. Power is 40 watts per channel at a load of 8 Ohms.


Amplifier received all-metal case made in a slim design. In the center of the front panel mounted 2-line LCD display showing the selected input, volume, menu, etc. Under it are 8 buttons input selector. On the right there are navigation buttons for menu and volume knob. To the left of the display is set the selector of the connected sets of speakers. On the left of the façade there is a power button/standby with LED diode, operation indicator protection and USB port for external storage. The USB input is compatible with iPod/iPhone/iPad. It is also possible to connect an external Bluetooth adapter for wireless audio transfer from mobile devices. For headphones on the front panel has a 3.5 mm output.


Rotel RA-11 V2 has a well-developed switching. Inputs: four RCA line, MM connectors-Phono stage for vinyl player, 2 coaxial and an optical connector. There is a cascade preamplifier output Pre Out (RCA). There is a socket on the system bus (this connector the entire system can be controlled from a smartphone or tablet app via the Rotel Remote App), a pair of trigger outputs and RS-232. For connecting speaker systems are 4 pairs of screw terminals. Amplifier equipped with a remote control. Balance adjustment and tone (HF and LF) can be done with the remote or through the menu with the front panel. For more natural sound linear you can activate the bypass mode of adjustment of a timbre.


The amp is consistent with the current requirements, providing not only analog, but with digital sources. Sound Rotel RA-11 V2 is characterized by accuracy, excellent detail, good dynamics and rhythm.


Features stereo amplifier, Rotel RA-11 V2



Built-in Wolfson WM8740 DAC (24bit/192kHz)
Wide switching capacity, RS-232
Built-in MM Phono stage


Characteristics of the stereo amplifier Rotel RA-11 V2

Output power2 x 40 watts per channel (20 Hz – 20 kHz, THD less than 0.03%, 8 Ohms)
Frequency rangeline input: 10 Hz – 100 kHz (± 1 dB), Phono equalizer: 20 Hz – 15 kHz (± 0.3 dB)
THDless than 0.03% (20 – 20,000 Hz)
Intermodulation distortionless than 0.03%
The signal-to-noiseline: 100dB, Phono equalizer: 80 dB
Input sensitivity/impedanceline input: 150 mV/24 kOhms, Phono equalizer: 2.5 mV/47 kOhm
Output sensitivity/impedancePre Out: 1 V/470 Ohms
DACWolfson WM8740 (24 bits/192 kHz)
Supported file formatsUSB (flash drive): AAC (m4a), OGG Vorbis, WAV, MP3, WMA (up to 16bit/48kHz); USB (with iPhone/iPod/iPad): Apple Lossless, AAC, MP3, WAV, AIFF; optical/coaxial output: LPCM (24-bit/192 kHz)
Other supported formatsReal Audio, AU
Inputs4 linear RCA, the input of the MM-Phono stage (RCA), USB port (support iPod/iPhone and Bluetooth connectivity-adapter), 2 coaxial, 2 optical
Outputs3.5 mm earphone Jack
Other switching3.5 mm connector for the system bus, two trigger outputs (12 V), grounding terminal
The output on the speaker4 pairs of screw terminals
Power consumption220 W, standby mode: 0.5 W
Remote controlRR-AX91
Bluetooth adapterincluded
Dimensions (WxHxD)430x72x342 mm
Weight6.4 kg

Advertise
Copyright © 2013-2019 audio-reviews.com