Home/Amplifier /Stereo Amplifier Rega Elicit-R
Advertise

Photos and specs Stereo amplifier Rega Elicit-R

Review and test Stereo amplifier Rega Elicit-R
  • Stereo Amplifier Rega Elicit-R
  • Stereo Amplifier Rega Elicit-R
  • Stereo Amplifier Rega Elicit-R
  • Stereo Amplifier Rega Elicit-R

Description stereo amplifier, Rega Elicit-R

Amplifier Rega Elicit-R is a reincarnation of well-known models Elicit. The device has received a well damped enclosure, made in the new design, as well as some changes in design. The appearance of the Elicit-R is reminiscent of the style of Lifestyle, but under the hood this Prim and proper Englishman found very different talents, corresponding strictly to the Hi-Fi. The front panel has a box on the right side is the volume knob (gain level is visually determined by the number of arranged around her luminous LEDs) and the activation button input selector with five LED indicators (after clicking an input selection occurs by using the volume knob). There are also key Mute (mute), Direct (signal directly into the final section with the corresponding entry) and Record (monitoring record). Power button with indicator light-logo on the left side. In the sidewall of the housing has a built-in cooling radiator.


Amplifier Rega Elicit-R is built on the basis of the outputs of the model Brio-R. In the section set pre-amp, FET-transistors. Output stages utilize high-current complementary bipolar Darlington transistors production Sanken. In signal circuits used polypropylene capacitors and other selected items. The power supply uses a massive toroidal transformer. The model delivers 105 watts per channel at 8 Ohms and 162 W at a load of 4 Ohms. Step volume control allows accurate 80-step tuning (1 step corresponds to 1 dB). On Board also a high quality Phono stage for moving heads moving magnet.


On the back of the amplifier are the following inputs: 4 line RCA, direct input terminal of the cascade and RCA for monitor recording. Special attention is given the Input 1, consisting of two pairs of RCA connectors, between which is located the push button switch. The left pair is the MM connectors-Phono stage. The right pair works as a line input when pressed for a switch and has a low noise level. Outputs: fixed recording (2 units) and a pre-output section (RCA). For the speakers there are two pairs of high-quality terminals. The kit includes a universal Rega Solaris remote control.


Rega Elicit-R has an expressive sound and smooth tonal balance. Its sound is also characterized by exceptional musicality, clarity and purity. Build the amplifier stage is characterized by the depth and accuracy of localization of image in space.


Features stereo amplifier, Rega Elicit-R



Power 105 W per channel (8 Ohms)
Darlington transistors in the output stage
Built-in MM Phono stage


Features stereo amplifier, Rega Elicit-R

Rated output power2 x 105 watts (8 Ohms),2 x 127 W (6 Ohms), 2 x 162 watts (4 Ohms)
Input sensitivityline inputs: 196 mV (10 kOhm); input of the Phono stage: 2 mV (47 K ohms, 220 pF); amplifier power: 760 mV (50 kω)
Gain31,6 dB
The output level (the output for recording)196 MB
Output level (pre out)760 mV
Frequency range (line inputs)10 Hz - 85 kHz (-1 dB, -3 dB)
THDOf 0.01% (line input), 0,003% (entrance end section)
Inputs5 line RCA (1 4); input MM Phono stage; Record Input (RCA, monitoring, recording); Direct Input (RCA) for direct access to terminal cascade
Outputs2 RCA for record line output (RCA)
Other switchinggrounding terminal
The power supplytoroidal transformer
The speakertwo pairs of terminals
The system of protection against overheating, overload, short circuit and over voltage constant current outputseparated from circuits passing audio
Power consumption375 watts
Remote controlRega Solaris, universal
Dimensions (WxHxD)432x82x340 mm
Weight13 kg

Advertise
Copyright © 2013-2019 audio-reviews.com