Description stereo amplifier, Marantz PM8005
Integrated amp Marantz PM8005 fully discrete scheme with current feedback. The device combines audiophile sound quality and good functional equipment that allows you to create on its basis a versatile audio system
The amplifier develops the output power 2 x 70 watts (8 Ohm load), and has a symmetrical design that provides good stereo separation. In the power supply Marantz PM8005 installed custom-made toroidal transformer, providing sufficient energy to ensure dynamic sound. To eliminate electromagnetic interference that can adversely affect the quality of audioshell, the transformer is placed in a double screen. The rectifier source is built on a high-speed Schottky diodes, and in the sound scheme of the apparatus components are installed audiophile.
Power supply and current feedback Marantz PM8005 allow you to confidently rock speakers, even with complex characteristic impedance. The device makes use of proprietary amplifier modules HDAM, and the bottom panel is made of three-layer for damping mechanical vibrations.
The amplifier is equipped with a three-band tone controls (bass, middle, treble), which considerably simplifies the setting of optimum tonal balance depending on the characteristics of other system components and the listening room. On the rear panel of the Marantz PM8005 has five line inputs, input for connecting a MM cartridge the turntable, output to recording devices. In addition, it provides adjustable output with preamp and direct input of the outlet - their presence opens the possibility of an upgrade system based on Marantz PM8005. All connectors on the amplifier are gold-plated contact surfaces.
The amplifier is equipped with a comfortable branded terminals SPKR-100 for speakers, the impedance of which may be in the range of 4 to 16 Ohms. Marantz PM8005 also you can connect earphones with a connector with a diameter of 6.3 mm.
Features stereo amplifier, Marantz PM8005
\t
Outputs for two pairs of speakers
Toroidal transformer in the power supply
Built-in MM Phono stage
Separate section pre and power amplifier
Tone control bass, middle and treble
Features stereo amplifier, Marantz PM8005
Output power | 2 x 70 watts (8 Ohms), 2 x 100 watts (4 Ohms) |
Frequency range | 5 Hz - 100000 Hz (± 3 dB) |
The ratio signal/noise | bole 106 dB (line in), 87 dB (Phono) |
THD | less than 0.02% (1 kHz) |
The damping ratio | 100 |
Inputs | 6 RCA, power amplifier, MM Phono stage, remote control system |
Outputs | with the preamp on the recording, on headphones, for two pairs of speakers |
Sensitivity/impedance | 2 mV / 47 kOhm (Phono), 200 mV / 20 kOhm (linear) |
Tone adjustment | BASS, MIDDLE, TREBLE |
The HDAM modules | SA2, SA3 |
The direct signal | there are, Source Direct |
Auto power off | there |
Power consumption | 220 W |
Dimensions (WxHxD) | 440 x 379 x 128 mm |
Weight | 12 kg |
Copyright © 2013-2023 audio-reviews.com |