Home/Amplifier /Stereo amplifier Electrocompaniet ECI-6 D
Advertise

Photos and specs Stereo amplifier Electrocompaniet ECI-6 D

Review and test Stereo amplifier Electrocompaniet ECI-6 D
  • Stereo amplifier Electrocompaniet ECI-6 D
  • Stereo amplifier Electrocompaniet ECI-6 D
  • Stereo amplifier Electrocompaniet ECI-6 D
  • Stereo amplifier Electrocompaniet ECI-6 D

Description stereo amplifier, Electrocompaniet ECI-6 D

Amplifier Electrocompaniet ECI-6 D are developed based on the model ECI-5 Mkll and different from his older brother, the ECI-6 DS the lack of network module. The device is able to impress with its neat design, which is guessed Norwegian restrained elegance. Its weight is 20 kg.


On the left under the transparent acrylic front panel is the display with large characters blue color, which indicates which sources are used. The display can also show other signs that help you determine the cause of tripping in the event of an emergency situation. Located in the center of the logo of the company simultaneously serves as a volume indicator, beneath which is a Golden key power. On the right side of the cross bar are four buttons. One pair of buttons is used to select inputs, and the second (vertical pair) – to adjust the volume.


Applies fully balanced topology schemes. Input discrete cascade corresponds to A class (feedback in it is not used). The output transistors are powerful and are already involved feedback. The power supply of the amplifier is equipped with a toroidal transformer 500 VA and capacitors with a total capacity of 80,000 µf, which allows it to reach 125 watts per channel at 8 Ohms. On Board there is a chip digital-to-analog Converter, and supplied to the DAC digital signal is pre-is the process of upsampling to 24 bit/192 kHz.


Model Electrocompaniet ECI-6 D is equipped with the following inputs: balanced XLR, RCA two adjustable and one fixed HT (RCA), which is used to directly access the amplifier section that will be particularly useful when using ECI-6 D in the home theater environment. There are two optical (24-bit/96kHz) and coaxial (24-bit/192 kHz) inputs and an asynchronous USB (24 bit/192 kHz), allowing to connect to the computer when you install the correct driver. For remote amplifier composed of multi-room systems use RS-232. There are two trigger ports (In and Out). The potential model can be enhanced by connecting the outlet using one of the two outs are balanced XLR or cinch. For the connection to the as there are four high-quality screw terminals. The kit includes a basic remote control.


The sound of the Electrocompaniet ECI-6 D is able to captivate its clarity, transparency, abundance of parts, pressure, well controlled bass and impressive scene. Amplifier loyal to any musical genre.


Features stereo amplifier, Electrocompaniet ECI-6 D


Balanced topology diagrams
Built-in DAC, asynchronous USB input
Toroidal transformer 500 VA


Characteristics of the stereo amplifier Electrocompaniet ECI-6 D

Output power2 x 125 watts (8 Ohms), 2 x 200 W (4 Ohms), 2 x 370 watts (2 Ohms)
Input impedance (balanced input)47 kOhm
The maximum input voltage10 In
THD0,004%
Output impedance0.02 Ω
Frequency range1 Hz – 150 kHz
Channel separation120 dB
The maximum peak current100 And
The damping ratiomore than 350
Input sensitivity1.3
Input sensitivity (log HT)1 In
Gain coefficient (log HT)31 dB (х36)
The Bitness Of The DAC24 bit/192 kHz
Inputsbalanced XLR, 2 RCA, unregulated HT (RCA), 2 optical (24 bit/96 kHz), 2 coaxial (24bit/192kHz), asynchronous USB (24 bit/192 kHz)
Outputsbalanced XLR, unbalanced RCA
Other switchingRS-232, trigger input and output
The speaker4 screw terminals WBT
The power supplytoroidal transformer (500 VA), the total capacitance: 80000 UF
Power consumption110 W, standby: 1 W
Remote controlthere
Dimensions (WxHxD)465х128х405 mm
Weight20 kg

Advertise
Copyright © 2013-2019 audio-reviews.com