Photos and specs Stereo amplifier Denon PMA-520AE
Description stereo amplifier, Denon PMA-520AE
Stereo integrated amplifier entry level Denon PMA-520AE recently appeared in the company catalogue, but has already become very popular among music lovers. The device is assembled using a proprietary circuit design High-Single-Push-Pull push-pull amplification with low distortion, and has extended frequency and dynamic ranges, and high output current.
In the power supply of the amplifier used filter capacitors of increased capacity, and independent sources for individual functional units of the apparatus, and in the most important from the point of view of sound quality circuits installed selected components. The amplifier is assembled on a chassis voltage with the corporate design Direct Mechanical Ground.
Amplifier Denon PMA-520AE is equipped with four line inputs, input/output to connect a recording device. There is also a input to connect a turntable, which surely will be appreciated by novice "vinylamine". For connecting speaker systems are two pairs of high quality binding posts, which are suitable and connector type "banana". On the rear panel of the amplifier there is also one fabric elektroseti to which you can connect any device that heats up and stops simultaneously with the PMA-520AE. Also provides input and output for external remote control system.
On the front panel, the Denon PMA-520AE, arranged in the classic style of the "Golden seventies" are volume controls, tone at low and high frequencies and stereoballs, buttons profiles, loudness and direct feed audio. There is also a selector signal sources, and inputs for CD and Phono switching of signals occurs through high relay, located in the vicinity of the input jacks. Provides headphone out (6.3 mm Jack with gold-plated contact surfaces).
The amplifier comes with a remote control, which also has access to the basic functions of a CD player Denon DCD-520AE, forming with this unit a very good Duo.
Features stereo amplifier, Denon PMA-520AE
Technology Single Push-Pull Circuit
Built-in MM Phono stage
Switched socket
Features stereo amplifier, Denon PMA-520AE
| Power | 2 x 70 W 4 Ohms) 2x 45 watts (8 Ohms) |
| THD | 0,02% |
| Frequency range | 20 Hz - 20 kHz |
| Built-in Phono equalizer | MM |
| The signal-to-noise | Line input: 105 dB Phono stage: 84 dB |
| Input sensitivity | Line in: 100 mV Phono stage: 2.5 MB |
| Resistance | 47 kOhm |
| Adjustment bass / treble | 100 Hz &±; 8 dB |
| Connectors | 4 line inputs, a Phono (MM), headphone output (front panel, 6.3 mm), line out jacks to connect a pair of speakers (screw) |
| Balance adjustment | There |
| Pure Direct Mode | There |
| Tone adjustment | There |
| Remote control | With the ability to control other components |
| Sizes | 434 x 121 x 337 mm |
| Weight | 6.8 kg |
| Copyright © 2013-2024 audio-reviews.com |
|