Home/Amplifier /Stereo amplifier Audionet SAM G2
Advertise

Photos and specs Stereo amplifier Audionet SAM G2

Review and test Stereo amplifier Audionet SAM G2
  • Stereo amplifier Audionet SAM G2

Description stereo amplifier Audionet SAM G2

Integrated amplifier Audionet SAM G2 combines the latest audio technology, excellent sound and fairly compact size. The model has an updated design and is made using high quality materials. The front panel can be black or silver, and the display may have a blue or red light.


The amplifier has six line inputs, one balanced, and can be optionally equipped with high quality MM/MC-Phono stage. Also in Audionet SAM G2 is provided by the outputs from the preamplifier and to connect a recording device. For connecting speaker systems are designed for reliable screw terminals; is on the back panel and the headphone is a very unusual solution, which, however, makes the appearance of the device more accurate. There is a mode by-pass, which lets you use the amplifier in your home theater. To turn the amplifier into a single governance system, a connector Audionet Link.


In the scheme Audionet SAM G2 into account everything that can affect the sound quality. Switching inputs is made based relays with gold-plated contacts, and the audio signal is transmitted over solid silver cables. The power supply apparatus is made based on a toroidal transformer with a capacity of 700 VA, and the total capacitance of the filter capacitors is 96000 UF. Power output Audionet SAM G2 is 110 watts per channel load resistance of 8 Ohms, and increases to 200 watts per channel when connected to 4 Ohm speakers.


The unit itself is designed with a dual mono, each channel is not dependent on the other. In the amplifier circuit uses audiophile grade components, including electrolytic capacitors with a silk dielectric. The scheme provides filtering of mains interference that could affect the operation of audioshell.


Amp control fully electronic, and is based on the microprocessor. This allowed very flexible to configure the Audionet SAM G2, depending on the needs of the user. All the necessary information in the most visual form displayed on the front panel. If necessary, the internal software of the amp can be updated.


Features stereo amplifier Audionet SAM G2


The design of the "dual mono"
Microprocessor control
Toroidal transformer power 700 W

Balanced XLR and unbalanced RCA inputs


Characteristics of the stereo amplifier Audionet SAM G2

The number of channels2
Power2 x 110 watts (8 Ohms), 2 x 200 (4 Ohms)
Capacity filter capacitors96000 UF
Frequency range0 Hz – 500 kHz (-3 dB)
The damping ratio more than 1000 (1 kHz)
Stereo separationmore than 93 dB (1 kHz)
Harmonic distortion and noiseless than -100 dB (1 kHz)
The signal-to-noise more than 103 dB
Input impedance line input: 10 kOhm, 150 pF; XLR: 3 kOhm, 170 pF
Inputs5 line RCA, XLR
Outputswith preamplifier, recording device, headphone
Output terminals for connecting acousticsa pair of screw terminals
Additionallyoptical Audionet Link output
Power consumption700 watts (maximum), less than 1W (standby)
Dimensions (WxHxD)430х110х360 mm
Weight14.5 kg

Advertise
Copyright © 2013-2019 audio-reviews.com