Description of Marantz PM6005 stereo amplifier
Integrated stereo amplifier Marantz PM6005 is available in an updated design that matches the concept of the Reference series Design. In addition, modernization has been the power supply, which features a new low-impedance toroidal transformer enclosed in an additional casing to reduce external electrical interference. In addition, Marantz PM6005 installed new filter capacitors with a higher temperature stability and lower noise. In the rectifier power supply uses high-speed Schottky diodes. Replaced in the amplifier and output transistors with higher speed and maximum permissible operating current. The revision was subjected to the heat-sinks to these transistors. Now you can connect a variety of digital sources and use it as a high quality, fully shielded DAC. It is implemented on the chip CS4398 (24bit/192kHz), which has established itself well in the Premium Series models. The device has a metallic front panel and custom anti-resonant chassis which protects the electronic circuitry from external influences.
As a result, the company's engineers have managed to significantly increase the dynamic and frequency ranges of this very good system, making it sound even more attractive to music lovers. Thus functionality Marantz PM6005 has remained the same - it has a high quality built-in Phono equalizer for MM pickup, five line inputs, outputs for connecting two recording devices. All line inputs are equipped with buffer circuits for reducing the influence of connection cables on sound quality. On the front panel of the amplifier has the controls in all modes of its work, including the setting of the timbre in the low and high frequencies and stereoballs, as well as enable direct feed of signal in the bypass auxiliary circuits. Marantz PM6005 is equipped with a switchable loudness circuit for improving sound quality of audio when listening at low volume. To the amplifier you can connect two pairs of speakers, and its front panel has a Jack for headphone. Marantz PM6005 is also equipped with inlet and outlet for connection proprietary control systems, and comes with a remote control.
Features of the Marantz PM6005 stereo amplifier
Toroidal transformer
Built-in DAC
Output for two pairs of speakers
The entry for MM-pickup
Characteristics of the Marantz PM6005 stereo amplifier
Output power | 2 x 45 watts (8 Ohms), 2 x 60 watts (4 Ohms) |
Frequency range | 10 Hz To 70000 Hz |
The ratio signal/noise | - 87 dB (line input) |
The damping ratio | 100 |
THD | less than 0,0008% |
Inputs | MM-coil pickup, 5 line, S/PDIF (optical and coaxial), remote control |
Outputs | 2 the record on headphones, 2 pairs of speakers, do |
Sensitivity/impedance MM input | 2 mV / 47 kOhm |
Sensitivity/impedance line input | 200 mV / 20 kOhm |
Power consumption | 150 W / 0.4 W (Standby) |
Dimensions (WxHxD) | 440 x 105 x 366 mm |
Weight | 7.5 kg |
Copyright © 2013-2024 audio-reviews.com |